Follow

How do I charge my device using my charge force powerstation battery?

IMPORTANT: Before using your charge force powerstation battery for the first time, fully charge it (so that pressing the charge status button lights all 4 status LEDs).

Wireless charging

1. Place your mophie case with charge force wireless power or other Qi-enabled device on the charge force powerstation battery as shown in the illustration below.

Make sure that your device is aligned on the charge force powerstation battery as shown above. (mophie cases with charge force wireless power will automatically align for a proper charge.)

2. Press the status button for 2 seconds to begin charging. The charging LED (shown in the illustration below) will illuminate to indicate that the device is properly charging.

IMPORTANT: If the charging LED flashes on and off, it means that the wireless device is not charging properly. Make sure the device is properly aligned on the charge force powerstation battery as shown in the illustration for Step 1.

 

Wired charging

Connect the supplied USB cable (or the cable that came with your device) to the charge force powerstation battery’s USB port and to your device. Press the status button for 2 seconds to begin charging.

You can charge wireless and wired devices at the same time.

Was this article helpful?
0 out of 0 found this helpful